PINGI Car-Dehumidifier LV-A300 300g Moisture Absorber (Reuseable)

Over time a car interior accumulates quite a lot of humidity, fogging up windows and making it almost impossible to see the road. Foggy windows are not merely a nuisance – every car owner will agree that driving under such conditions is extremely dangerous.

The innovative PINGI Car- Dehumidifier battles this problem valiantly, attracting excess moisture like a magnet, and effectively absorbing it. The product eliminates excess moisture, ensuring the comfort and safety of starting your daily commute with a clear windshield. The product will also eliminate any bad odours that may have accumulated in the car interior. Your vehicle will have the same fresh smell as when you just bought it.

FEATURES:

• Suitable for all vehicles
• Dehumidifiers – Safer, Greener, and Reusable
• Reusable over a long period of time
• Pingis do not need refills or require electricity
• Leak-free as the moisture is held in using silica gel pellets
• Child and pet safe
• Eco-friendly as calcium chloride is not used and Pingis can be reused multiple times
• Easy to use as Pingi dehumidifiers won’t leak and can be placed virtually anywhere
• Adaptable to numerous applications in homes, cars, caravans, RVs, and boats
• Tested and approved in Germany (TÃœV Rheinland)
• The innovative solution (Microwave or Sun Recharges to use again)

SPECIFICATIONS:

• height=240"
• width=240"

Recharging PINGIs

• width=213"
• height=159"

NOTES:

• The Pingi dehumidifier bags are a great moisture absorber and easy to recharge in the microwave. When the moisture indicator changes from blue to pink, full saturation has been reached.

• Do not rip the bag and use only according to packaging instructions. Never place Pingi damp absorbers into a microwave when the indicator is blue or before it has reached its original weight + 30% as it can split and be permanently damaged. Make sure your microwave is clean before recharging your Pingi.

• Please follow the guidelines when recharging your Pingi moisture absorber to yield superior results.

SUGGESTED APPLICATIONS:

Fast recharging in the microwave oven

How to use:

• Remove the string bow and place your Pingi with the indicator facing upwards on a plate (with folded kitchen paper underneath) into a clean, fat and grease-free microwave oven (600W) for the time specified below.
• Pingi Mini: 3 minutes
• Pingi Bag: 5 minutes
• Pingi XL: 6 minutes, then remove Pingi XL for 5 minutes and dry the microwave and then place your Pingi back into the microwave for another 6 minutes.
• The moisture indicator will change colour from light pink back to blue after recharging. Let your Pingi cool off and reposition the bow after 5-10 minutes.
• Please note if you are using a stronger microwave oven (eg. 1000W), please reduce the above times by 40%.
  
  
• Your Pingi damp absorber is ready for use again

Recharging instructions for Pingi damp absorbers

• Pingi rechargeable damp absorbers are a sustainable and environmentally friendly solution to combat moisture and mould problems.
• Recharging Pingis is possible in a microwave (600W) or in the sun
• The penguin indicator on Pingi damp absorbers will gradually change colour from blue to light pink as the silica gel within the bag absorbs the moisture until it reaches the point of saturation
• The indicator is a rough guide only, and we recommend weighing the Pingi to determine when recharging is necessary
• Each Pingi can absorb approximately 30% of its weight before recharging is required
• Recharging in a microwave tends to produce a superior result and is quicker than recharging Pingis in the sun

SKU:

100051497

UPC:

Seller:

Allstate Healthcare

Type: